收藏本站
CN-0235
Equipment Needed
? PC with a USB port and Windows? XP or Windows Vista?
(32-bit), or Windows? 7 (32-bit)
? EVAL-CN0235-SDPZ circuit evaluation board
? EVAL-SDP-CB1Z SDP-B evaluation board
? CN0235 SDP evaluation software
? Power supply: +6 V, or +6 V “wall wart”
? Li-Ion batteries or precision dc supply
Getting Started
Load the evaluation software by placing the CN0235 Evaluation
Software disc in the CD drive of the PC. Using "My Computer,"
locate the drive that contains the evaluation software.
Functional Block Diagram
See Figure 1 of this circuit note for the circuit block diagram,
and the file “EVAL-CN0235-SDPZ-SCH-RevA.pdf ” for the
circuit schematics. This file is contained in the CN0235 Design
Support Package.
Setup
Connect the 120-pin connector on the EVAL-CN0235-SDPZ
circuit board to the connector marked “CON A” on the
EVAL-SDP-CB1Z evaluation (SDP-B) board. Nylon hardware
should be used to firmly secure the two boards, using the holes
provided at the ends of the 120-pin connectors. With power to
the supply off, connect a +6 V power supply to the pins marked
“+6 V” and “GND” on the board. If available, a +6 V "wall wart"
can be connected to the barrel connector on the board and used
in place of the +6 V power supply. The only other connections
required are to the lithium ion battery stack. The battery stack
can be simulated with a resistor divider, which is driven by a
precision dc supply voltage. Connect the USB cable supplied
with the SDP-B board to the USB port on the PC. Note: Do not
connect the USB cable to the mini USB connector on the SDP-B
Circuit Note
Test
Apply power to the +6 V supply (or “wall wart”) connected to
EVAL-CN0235-SDPZ circuit board. Launch the evaluation
software and connect the USB cable from the PC to the USB
mini-connector on the SDP-B board.
Once USB communications are established, the SDP-B board
can be used to send, receive, and capture serial data from the
EVAL-CN0235-SDPZ board.
Information regarding the SDP-B board can be found in the
SDP-B User Guide .
LEARN MORE
CN0235 Design Support Package:
www.analog.com/CN0235-DesignSupport
SDP-B User Guide: www.analog.com/SDP
Ardizzoni, John. A Practical Guide to High-Speed Printed-
Circuit-Board Layout , Analog Dialogue 39-09, September
2005.
MT-031 Tutorial, Grounding Data Converters and Solving the
Mystery of “AGND” and “DGND” , Analog Devices.
MT-101 Tutorial, Decoupling Techniques , Analog Devices.
Data Sheets and Evaluation Boards
CN-0235 Circuit Evaluation Board (EVAL-CN0235-SDPZ)
System Demonstration Platform (EVAL-SDP-CB1Z)
AD7280A Data Sheet and Evaluation Board
AD8280 Data Sheet and Evaluation Board
ADuM5404 Data Sheet
ADuM1400 Data Sheet
REVISION HISTORY
1/12—Revision 0: Initial Version
board at this time.
(Continued from first page) Circuits from the Lab circuits are intended only for use with Analog Devices products and are the intellectual property of Analog Devices or its licensors. While you
may use the Circuits from the Lab circuits in the design of your product, no other license is granted by implication or otherwise under any patents or other intellectual property by
application or use of the Circuits from the Lab circuits. Information furnished by Analog Devices is believed to be accurate and reliable. However, "Circuits from the Lab" are supplied "as is"
and without warranties of any kind, express, implied, or statutory including, but not limited to, any implied warranty of merchantability, noninfringement or fitness for a particular
purpose and no responsibility is assumed by Analog Devices for their use, nor for any infringements of patents or other rights of third parties that may result from their use. Analog Devices
reserves the right to change any Circuits from the Lab circuits at any time without notice but is under no obligation to do so.
?2012 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
CN10135-0-1/12(0)
Rev. 0 | Page 6 of 6
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
EVAL-CN0253-SDPZ EVAL MONITOR CIRCUIT FRONT END
EVAL-CN0271-SDPZ EVAL SYSTEM FOR CN0271
EVAL-INAMP-82RMZ BOARD EVAL FOR AD8220 MSOP
EVAL-PRAOPAMP-1KSZ ADAPTOR BOARD SINGLE AMP SC70-5
EVAL-PRAOPAMP-1RJZ ADAPTOR BOARD SINGLE AMP SOT23-5
EVAL-PRAOPAMP-1RMZ ADAPTOR BOARD SINGLE AMP 8MSOP
EVAL-PRAOPAMP-1RZ ADAPTOR BOARD SINGLE AMP 8SOIC
EVAL-PRAOPAMP-2RMZ ADAPTOR BOARD DUAL AMP MSOP
相关代理商/技术参数
EVAL-CN0240-SDPZ 功能描述:BOARD EVAL ISOLATED CURR SENSOR RoHS:是 类别:编程器，开发系统 >> 评估板 - 传感器 系列:Circuits from the Lab™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:-
EVAL-CN0241-SDPZ 功能描述:BOARD EVAL FOR CN0241-SDPZ RoHS:是 类别:编程器，开发系统 >> 评估板 - 传感器 系列:Circuits from the Lab™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:-
EVAL-CN0243-EB1Z 功能描述:RF EVAL SIGNAL CHAIN DAC IQ MOD RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件，板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796
EVAL-CN0251-SDPZ 功能描述:其他开发工具 Flexible Signal Conditioning for PLC/DCS RoHS:否 制造商:Parallax 产品:ELEV-8 Hex Upgrade Kits 类型:Robotics 工具用于评估:ELEV-8 Quadcopter 工作电源电压:
EVAL-CN0253-SDPZ 功能描述:EVAL MONITOR CIRCUIT FRONT END RoHS:否 类别:编程器，开发系统 >> 评估演示板和套件 系列:* 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081
EVAL-CN0254-SDPZ 功能描述:数据转换 IC 开发工具 Multi-ch Data Acq sys w/isolated SPI prt RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V
EVAL-CN0255-SDPZ 功能描述:数据转换 IC 开发工具 L_PWR SglSpl 16bADC Ckt 4 PWR sens.apps RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V
EVAL-CN0256-EBZ 功能描述:界面开发工具 Isolated LVDS RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V